osha safety – OSHA Safety Training http://oshatrainingsafetycourses.com/blog Mon, 24 Feb 2020 20:18:00 +0000 en-US hourly 1 https://wordpress.org/?v=4.9.26 Recommended Practices for Safety & Health Programs in Construction http://oshatrainingsafetycourses.com/blog/worker-safety-articles/recommended-practices-for-safety-health-programs-in-construction/ Mon, 17 Jun 2019 08:29:00 +0000 http://osha10hrtraining.com/blog/?p=13288 Responsible employers know that the main goal of a safety and health program is to prevent work-related injuries, illnesses, and deaths, as well as the suffering and financial hardship these events can cause for workers and their families.

osha_construction_worker_safetyImage Source: Shutterstock

Employers may find that implementing recommended safety practices brings other benefits as well. The renewed or enhanced commitment to safety and health and the cooperative atmosphere between employers and workers have been linked to:

  • Improvements in production and quality.
  • Better employee morale.
  • Improved employee recruiting and retention.
  • A more favorable image and reputation (among customers, suppliers, and the community).
OSHA TrainingOSHA 10hr/30hr Outreach Training : 15% OFF SALE
  • Know Your Rights! Under federal law, you are entitled to a safe workplace.
  • Training provides details on OSHA, workplace hazards, workers’ legal rights, employer responsibilities, and how to file a complaint. Required by some states and companies in order to start employment.
  • DOL Plastic Card Shipped Within 2 Weeks
  • Reg. Price: 10hr: $89 - 30hr: $189
  • Enter Promo Code "osha15off" at Checkout

Case Study: Ohio Worker Compensation Fell with SHARP Program Adoption

A study of small employers in Ohio found that workers’ compensation claims fell dramatically after working with OSHA’s SHARP program to adopt programs similar to those described in these recommended practices.

Source: Ohio Bureau of Workers’ Compensation (2011), Ohio 21(d) SHARP Program Performance Assessment.

Nine Easy Things To Get An Employer Safety Program Started

For many small businesses, establishing an injury and illness prevention program may seem daunting. Any program based on formal structures can be difficult to establish in a small organization because of tight budgets. Yet simple, low-cost approaches have been shown to be effective in small businesses.

If these recommended practices appear challenging, here are some simple steps you can take to get started. Completing these steps will give you a solid base from which to take on some of the more structured actions presented in the recommended practices.

  1. Always Set Safety And Health As The Top Priority
    Tell your workers that making sure they finish the day and go home safely is the way you do business. Assure them that you will work with them to find and fix any hazards that could injure them or make them sick.
  2. Lead By Example
    Practice safe behaviors yourself and make safety part of your daily conversations with workers.
  3. Implement A Reporting System
    Develop and communicate a simple procedure for workers to report any injuries, illnesses, incidents (including near misses/close calls), hazards, or safety and health concerns without fear of retaliation. Include an option for reporting hazards or concerns anonymously.
  4. Provide Training
    Train workers on how to identify and control hazards with OSHA Outreach 10-hour or 30-hour Training.
  5. Conduct Inspections
    Inspect the job site with workers and ask them to identify any activity, piece of equipment, or material that concerns them. Use checklists and other resources, such as OSHA’s Construction Industry Digest, to help identify problems.
  6. Collect Hazard Control Ideas
    Talk with workers about ideas on safety improvements throughout the project.
  7. Implement Hazard Controls
    Assign workers the task of choosing, implementing, and evaluating the solutions.
  8. Address Emergencies
    Identify foreseeable emergency scenarios and develop instructions on what to do in each case. Meet to discuss these procedures and post them in a visiblelocation at the job site.
  9. Make Improvements
    Set aside a regular time to discuss safety and health issues, with the goal of identifying ways to improve the program.

More Information:

OSHA: Recommended Practices for Safety & Health Programs in Construction (PDF 40 pps)

 

 

 

]]>
States Requiring 10-hour 30-hour OSHA Training http://oshatrainingsafetycourses.com/blog/worker-safety-articles/states-requiring-10-hour-30-hour-osha-training/ Wed, 20 Mar 2019 06:16:00 +0000 http://oshatrainingcampus.com/blog/?p=13468 OSHA recommends Outreach training as an orientation to occupational safety and health for workers. Some states require OSHA Outreach training and have enacted laws mandating the 10hr and/or 30hr OSHA training requirements. Likewise, some employers, unions, organizations or other jurisdictions may also require OSHA Outreach training.

OSHA 10-hour or 30-hour training programs are in-depth certification courses, created by OSHA and administered by government authorized trainers. The 10-hour class is intended to provide workers with awareness of common job-related safety and health hazards, while the 30-hour class is more appropriate for supervisors or workers with some safety responsibility.

Is OSHA training required in your state? Take a look at the specific requirements for your state.

Image Source: Shutterstock

OSHA 10-hour Construction Curriculum

The mandatory curriculum must include an introduction to OSHA, personal protective equipment and lifesaving equipment, health hazards in construction and the “focus four hazards” which are falls, electrocution, struck by, and caught in/or between. The elective topics include cranes, excavations, material handling, scaffolds, stairways, ladders, hand and power tools, and one hour of optional material covering industry hazards or an expansion on required topics.

OSHA TrainingOSHA 10hr/30hr Outreach Training : 15% OFF SALE
  • Know Your Rights! Under federal law, you are entitled to a safe workplace.
  • Training provides details on OSHA, workplace hazards, workers’ legal rights, employer responsibilities, and how to file a complaint. Required by some states and companies in order to start employment.
  • DOL Plastic Card Shipped Within 2 Weeks
  • Reg. Price: 10hr: $89 - 30hr: $189
  • Enter Promo Code "osha15off" at Checkout

OSHA 30-hour Construction Curriculum

The mandatory curriculum must mirror that of the 10-hour construction curriculum but the time required is increased. The elective topics are expanded in the 30-hour training to 12 hours and they may include safety information about concrete and masonry construction, confined space entry, ergonomics, excavations, fire protection, motor vehicle safety, powered industrial vehicles, safety and health programs, steel erection, welding and cutting, foundations for safety leadership, and 3 hours of optional material covering industry hazards, policies, and an expansion on required topics.

States that require 10hr/30hr OSHA Outreach training:

Connecticut, Massachusetts, Missouri, Nevada, New Hampshire, New York, Pennsylvania, Rhode Island, and West Virginia

Connecticut

  • All employees who perform work on any public building project paid for in whole or part by state funding, or any of its agencies, where the total cost is over $100,000. This law went into effect in 2007.
  • Each contractor needs to furnish proof that all employees have taken the OSHA 10 hour Construction Course within 30 days of being awarded the contract. Employees who have not completed the course are subject to removal from the worksite.
  • The OSHA 10 hour Construction Course must also be retaken every 5 years.

Reference: Connecticut General Statutes – Section 31‐53b – Construction Safety

Missouri

  • Missouri Construction Safety Training Act requires all contractors and subcontractors who enter into contracts with public bodies for construction of public works to train their on-site employees regarding the potential hazards they may encounter. The law went into effect in 2009.
  • Any employee found on a work site subject to this section without documentation of the successful completion of an OSHA 10 Hour course shall be afforded 20 days to produce such documentation before being subject to removal from the project.
  • It is also the employer’s responsibility to make sure all their employees have their certification card and turn in proof to the contracting agency before the job starts. The employer can be fined for allowing an employee onsite who does not have a valid OSHA 10 hour certification card.

References:

Massachusetts

  • All employees to be employed at a worksite needs to complete the OSHA 10 hour construction course before beginning work on the worksite. The law went into effect in 2004.
  • Any employee found on a worksite subject to this section without documentation of successful completion of the OSHA 10 hour course shall be subject to immediate removal.
  • The Massachusetts law specifically says “at least 10 hours” – so an OSHA 30 hour construction course would also enable the worker to meet these requirements.
  • It is also the employer’s responsibility to make sure all their employees have their certification card and turn in proof to the contracting agency before the job starts. The employer can be fined for allowing an employee onsite who does not have a valid OSHA10 hour certification card.
  • The OSHA 10 hour Construction Course must also be retaken every 5 years.

Reference:  Massachusetts General Laws – Chapter 30: Section 39S

New Hampshire

  • Any person who signs a contract to work on a construction, reconstruction, alteration, remodeling, installation, demolition, maintenance, or repair of any public work or building by a state agency or municipality with a total project cost of $100,000 or more. The law went into effect in 2007.
  • Employees who fail to obtain their OSHA 10 Hour Card after 15 days of starting work, will be removed from the jobsite.
  • Employers can face penalties up to $2,500 and a civil penalty of $100 per employee for each day of noncompliance.

References:

New York

  • New York State Labor Laws – Chapter 282 – Labor Law §220-h took effect on July 2008. All public works contracts for New York state and municipal construction jobs of $250,000 or more require certification that all employees performing work under the contract will have successfully completed an OSHA 10-hour construction course.
  • New York City OSHA Laws – NYC Int. 790-A of Local Law 48 of 2008 requires all construction workers to complete an OSHA Outreach 10 hour course within the previous 5 calendar years.
  • New York City OSHA Laws also requires all site supervisors complete an OSHA Outreach 30 hour training course.
  • Renewal: Once you have completed OSHA 10 training for work on Article 8 public work projects, New York State does not require renewal. However, New York City does require renewal of the training every 5 years.
  • By December 1, 2018, workers at job sites that require a Site Safety Plan (which includes sites that must designate a Construction Superintendent, Site Safety Coordinator or Site Safety Manager) and must receive a minimum of 40 hours of training. That means workers must have the OSHA 10 and 30 hours construction training.

Reference:  New York State – Department of Labor – OSHA 10 Information

Nevada

  • All construction workers in the state to undergo a 10-hour safety training course (OSHA-
  • 10) developed by the U.S. Labor Department’s Occupational Safety and Health Administration (OSHA) at least once every five years. The training must be completed no more than 15 days of being hired.
  • All supervisors on a construction site to undergo a 30-hour safety training course (OSHA-30) approved by OSHA at least once every five years. The training must be completed no more than 15 days of being hired.
  • If an employee or supervisor does not gain 10 or 30-hour certification, then their employment must be terminated or suspended. Employers who fail to terminate or suspend employees are subject to administrative fines and penalties.

Reference: Nevada Assembly Bill No. 148 (PDF)

Pennsylvania – Philadelphia

  • All workers directly performing construction or demolition activities for which permits have been issued are required to complete OSHA 10 safety training or an approved equivalent. (Philadelphia Code, Title 4, Subcode A, Section A – 1001.4). This requirement applies to all employees of licensed contractors (including plumbing, electrical, fire – suppression and warm – air contractors) AND State – registered Home Improvement Contractors. Workers will be required to furnish proof of required safety training to Department of Licenses and Inspections officials upon request.
  • All contractors licensed under Section 9 – 1004 of the Philadelphia Code must employ at least one supervisory employee who has completed OSHA 30 safety training, or approved equivalent, within the past 5 years. (Philadelphia Code, Section 9 – 1004(4)(c.1)). Licensed plumbing, electrical, fire suppression, and warm – air contractors are not required to employ an OSHA 30 supervisory employee. Identification of a supervisory employee and proof of training will be required for all new Contractor License applications made after September 30, 2015 and for the renewal of all Contractor Licenses set to expire on or after March 31, 2016.

References:

Rhode Island

  • All workers who perform work on municipal and state construction projects with a total project cost of one $100,000 of more to OSHA10-hour certification. Workers are also to carry the card on their person at all times while work is actually being performed.
  • Any employee required to complete the OSHA 10-hour construction safety program who has not completed the program will be subject to removal from the worksite, if the employee does not provide documentation of having completed such program by the 15th day after the date the employee is found to be in noncompliance.
  • The state may also assess a civil penalty of up to $2,500; in addition, such an employer shall be assessed a civil penalty of $100 per employee for each day of noncompliance.

Reference: Rhode Island General Laws – Title 37. Public Property and Works – §37-23-1 Safety awareness program required. (PDF)

West Virginia

  • All workers who perform work on a public project costing more than $50,000 or more, requires each employee onsite to have their OSHA 10 hour certification card.
  • Any employee required to complete the OSHA 10-hour construction safety program who has not completed the program will be subject to removal from the worksite, if the employee does not provide documentation of having completed such program by the 21st day after the date the employee is found to be in noncompliance.
  • The state may also assess a civil penalty of up to $1,000; in addition, such an employer shall be assessed a civil penalty of $100 per employee for each day of noncompliance.

Reference:  West Virginia Code – Chapter 21 Labor – Article 3. Safety and Welfare of Employees – §21-3-22. OSHA construction safety program.

]]>
Why OSHA training is important for businesses http://oshatrainingsafetycourses.com/blog/worker-safety-articles/understanding-why-osha-is-important-for-business/ Tue, 02 Oct 2018 08:29:00 +0000 http://oshatrainingu.com/?p=13117 Every year, workplace injuries, illnesses and fatalities cost our nation more than $170 billion. These costs affect every man, woman and child in the U.S. – every employee, every employer and every family member.

Businesses spend $170 billion a year on costs associated with occupational injuries and illnesses – expenditures that come straight out of company profits. But workplaces that establish safety and health management systems can reduce their injury and illness costs by 20 to 40 percent. In today’s business environment, these costs can be the difference between operating in the black and running in the red.

construction_worker_safetyImage Source: Shutterstock

Let us consider why OSHA important and good for businesses:

  • OSHA works with science and engineering experts, with input from industry, to develop standards for safety and health in the workplace.
  • Because employers are legally responsible for providing a safe and healthful workplace for employees, OSHA enforces these standards – firmly and fairly.
  • Recognizing that most employers want to comply with the law, OSHA has designed many tools and services to help businesses succeed.
OSHA TrainingOSHA 10hr/30hr Outreach Training : 15% OFF SALE
  • Know Your Rights! Under federal law, you are entitled to a safe workplace.
  • Training provides details on OSHA, workplace hazards, workers’ legal rights, employer responsibilities, and how to file a complaint. Required by some states and companies in order to start employment.
  • DOL Plastic Card Shipped Within 2 Weeks
  • Reg. Price: 10hr: $89 - 30hr: $189
  • Enter Promo Code "osha15off" at Checkout

OSHA Good for Employer and Employees

For employers, the financial toll of illnesses, injuries and fatalities on the job is enormous. Small and medium-sized businesses are especially vulnerable to the impact of workplace hazards –

First, because the resulting costs hit the slim budgets of small businesses very hard; and second, owners of small businesses often work side-by-side with their family members and other employees – making a worksite tragedy immediate and deeply personal.

osha_construction_worker_safetyImage Source: Shutterstock

For employees, on the job hazards can have a terrible impact. According to a study in the American Journal of Industrial Medicine, a single workplace illness or injury costs an employee and his or her family on average $8,000 – out of pocket – often forcing them to dip into savings or default on payments.

As a result, these employees are much more likely to lose their homes, their cars, and their health insurance. Taking steps to keep employees safe reduces this spiral of debt – and, of course, prevents a lot of suffering, strain and stress on thousands of lives.

 

]]>
OSHA Safety Training Leads to Less Injuries and Employer Costs http://oshatrainingsafetycourses.com/blog/worker-safety-articles/osha-safety-training-leads-to-less-injuries-and-employer-costs/ Tue, 02 Oct 2018 08:29:00 +0000 http://osha10hrtraining.com/blog/?p=13274 For many companies in the construction industry, the shortage of skilled and trained workers along with this need for increased productivity or trying to “get more from less” has negatively impacted safety on the job site.

The main goal of safety training is to prevent workplace injuries, illnesses and deaths, the suffering these events cause workers, and the financial hardship they cause both workers and employers.

construction_worker_safetyImage Source: Shutterstock

Employer Financial Costs

OSHA safety training will help employers avoid the substantial cost impacts and business disruptions that accompany occupational injuries, illnesses and deaths.

OSHA TrainingOSHA 10hr/30hr Outreach Training : 15% OFF SALE
  • Know Your Rights! Under federal law, you are entitled to a safe workplace.
  • Training provides details on OSHA, workplace hazards, workers’ legal rights, employer responsibilities, and how to file a complaint. Required by some states and companies in order to start employment.
  • DOL Plastic Card Shipped Within 2 Weeks
  • Reg. Price: 10hr: $89 - 30hr: $189
  • Enter Promo Code "osha15off" at Checkout

In addition to these direct costs, employers incur a variety of other costs that may be hidden or less obvious when an employee is injured or ill, but in most cases involve real expenditures of budget or time. These expenditures are commonly referred to as indirect costs and can include:

  • Any wages paid to injured workers for absences not covered by workers’ compensation;
  • The wage costs related to time lost through work stoppage;
  • Administrative time spent by supervisors following injuries;
  • Employee training and replacement costs;
  • Lost productivity related to new employee learning curves and accommodation of injured employees; and
  • Replacement costs of damaged material, machinery and property.
osha_construction_worker_workplace_safetyImage Source: Shutterstock

What Is the Evidence that Injury and Illness Prevention Programs Protect Workers and Improve the “Bottom Line”?

Numerous studies have examined the effectiveness of injury and illness prevention programs at both the establishment and corporate level.

This research demonstrates that such programs are effective in transforming workplace culture; leading to reductions in injuries, illnesses and fatalities; lowering workers’ compensation and other costs; improving morale and communication; enhancing image and reputation; and improving processes, products and services.

The studies also highlight important characteristics of effective programs, including management commitment and leadership, effective employee participation, integration of health and safety with business planning and continuous program evaluation. They suggest that programs without these features are not as effective.

construction_worker_safetyImage Source: Shutterstock

Recommended Practices for Safety and Health Programs

The main goal of safety and health programs is to prevent workplace injuries, illnesses, and deaths, as well as the suffering and financial hardship these events can cause for workers, their families, and employers. The recommended practices use a proactive approach to managing workplace safety and health.

Employers will find that implementing these recommended practices also brings other benefits. Safety and health programs help businesses:

  • Prevent workplace injuries and illnesses
  • Improve compliance with laws and regulations
  • Reduce costs, including significant reductions in workers’ compensation premiums
  • Engage workers
  • Enhance their social responsibility goals
  • Increase productivity and enhance overall business operations

Download the Recommended Practices for Safety and Health Programs

Download the Recommended Practices for Safety and Health Programs in Construction

]]>