Rhode Island OSHA Outreach 10-hour & 30-hour Training

Rhode Island OSHA 10hr & 30hr Construction Training Courses

  • OSHA 10hr
    Construction
  • OSHA 30hr
    Construction
  • OSHA 10hr
    General Industry
  • OSHA 30hr
    General Industry

Rhode Island OSHA 10 Hour Construction Training

Description: The OSHA Outreach 10 Hour Training Course provides instruction on OSHA regulations and requirements as they apply to 29 CFR 1926 (Construction). This course provides an entry level construction worker with a general awareness to recognizing and preventing hazards on a construction site.

Audience: All Construction Industry Employees: Workers, Foremen, Job Supervisors, Site Inspectors, Workers on publicly-funded projects.

Hours: 10 hours

Learning Objectives

  • Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
  • List the OSHA inspection priorities and describe the inspection process
  • Given OSHA historical events and current information, the student will be able to explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA
  • State the purpose of the OSH Act and list the functions of OSHA
  • Given OSHA historical events and current information, the student will be able to explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA
  • State the purpose of the OSH Act and list the functions of OSHA

Course Outline

  • Orientation
  • Introduction
  • Labels and SDS
  • Module 1: Introduction to OSHA
  • Module 2: OSHA Focus Four Hazards
  • Module 3: Personal Protective Equipment
  • Module 4: Health Hazards in Construction
  • Module 5: Cranes, Derricks, Hoists, Elevators and Conveyors
  • Module 6: Stairways and Ladders
  • Module 7: Lead Exposure
  • Module 8: Asbestos Exposure

OSHA Quizzes, Exam & Course Completion

Training time takes 10 hours to complete. Students must have a minimum score of 70% to pass the quizzes and the final exam. 3 attempts will be given to achieve a passing grade.

Upon completing the course and the corresponding survey, students will be able to print the training certificate on demand. The plastic DOL Wallet card will be shipped within 2 weeks.

Free OSHA HAZCom & GHS Supplemental Course

  • A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012.

Free OSHA Study Guide (PDF)

  • Course also includes a free OSHA 10 Hour Construction Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card.
  • You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player.
  • Other OSHA reference materials are available from the OSHA website - please visit: http://www.osha.gov/dte/outreach/
  • Note: The 10 Hour Construction Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.

Rhode Island OSHA 10 Hour General Industry Training

Description: The OSHA Outreach 10 Hour Training Course provides instruction on OSHA regulations and requirements as they apply to 29 CFR 1910 (General Industry). This course provides an entry level worker with a general awareness to recognizing and preventing hazards on the job site.

Audience:

  • Entry Level General Industry Workers
  • Industries included but not limited to: Health Care, Manufacturing, Warehousing, Distribution, and Retail Industries employees.

Hours: 10 hours

Learning Objectives

  • Understanding the OSH Act, the functions and resources of OSHA.
  • Becoming aware of the OSHA inspection priorities and describing the inspection process.
  • Knowing the rights and responsibilities of employers and employees under the OSH Act.
  • Learning the major hazards associated with general industry work and how to avoid, protect, or control them. This includes:
    • Slips, trips, falls associated with walking and working surfaces
    • Effective Egress and fire protection program
    • Outline the general requirements for general safety standards
    • Flammable and combustible liquids and gasses
    • Hazards of chemicals
    • Electrical hazards
  • Understanding the value of personal protective equipment, usage and limitations.
  • Learning the basic elements of a safety and health program.

Course Outline

  • Orientation
  • Introduction
  • Labels and SDS
  • Module 1: Introduction to OSHA
  • Module 2: Walking & Working Surfaces, including Fall Protection
  • Module 3: Exit Routes, Emergency Action Plans, Fire Prevention Plans and Fire Protection
  • Module 4: Electrical
  • Module 5: Personal Protective Equipment
  • Module 6: Hazard Communication
  • Module 7: Machine Guarding Safety
  • Module 8: Ergonomics
  • Module 9: Recordkeeping & Reporting
  • Module 10: Hazwoper

OSHA Quizzes, Exam & Course Completion

Training time takes 10 hours to complete. Students must have a minimum score of 70% to pass the quizzes and the final exam. 3 attempts will be given to achieve a passing grade.

Upon completing the course and the corresponding survey, students will be able to print the training certificate on demand. The plastic DOL Wallet card will be shipped within 2 weeks.

Free OSHA HAZCom & GHS Supplemental Course

  • A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012.

Free OSHA Study Guide (PDF)

  • Course also includes a free OSHA 10 Hour General Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card.
  • You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player.
  • Other OSHA reference materials are available from the OSHA website - please visit: http://www.osha.gov/dte/outreach/

 

Rhode Island OSHA 30 Hour General Industry Training

Description: The OSHA Outreach 30 Hour Training Course provides instruction on OSHA regulations and requirements as they apply to 29 CFR 1910 (General Industry). This course provides a comprehensive safety program specifically designed for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues.

Audience:

  • Foremen, Superintendents, Project Managers, Safety Coordinators, or Safety Specialists
  • Industries included but not limited to: Health Care, Manufacturing, Warehousing, Distribution, and Retail Industries employees

Hours: 30 hours

Course Outline

  • Orientation
  • Introduction
  • Labels and SDS
  • Module 1: Introduction to OSHA
  • Module 2: Managing Safety and Health
  • Module 3: Walking & Working Surfaces, including Fall Protection
  • Module 4: Emergency Action Plan
  • Module 5: Electrical Safety
  • Module 6: Personal Protective Equipment
  • Module 7: Materials Handling
  • Module 8: Hazard Communication
  • Module 9: Hazardous Materials (Flammable and Combustible Liquids, Spray Finishing, Compressed Gases, Dipping and Coating Operations)
  • Module 10: Permit-Required Confined Space
  • Module 11: Lockout / Tagout
  • Module 12: Machine Guarding
  • Module 13: Welding and Cutting
  • Module 14: Hazardous Substances & Industrial Hygiene
  • Module 15: Bloodborne Pathogens
  • Module 16: Ergonomics
  • Module 17: Fall Protection
  • Module 18: Safety and Health Programs
  • Module 19: OSHA Recordkeeping
  • Module 20: Process Safety Management
  • Module 21: Asbestos in Workplace
  • Module 22: Scaffolds
  • Module 23: HAZWOPER

OSHA Quizzes, Exam & Course Completion

Training time takes 30 hours to complete. Students must have a minimum score of 70% to pass the quizzes and the final exam. 3 attempts will be given to achieve a passing grade.

Upon completing the course and the corresponding survey, students will be able to print the training certificate on demand. The plastic DOL Wallet card will be shipped within 2 weeks.

Free OSHA HAZCom & GHS Supplemental Course

  • A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012.

Free OSHA Study Guide (PDF)

  • Course also includes a free OSHA General Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card.
  • You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player.
  • Other OSHA reference materials are available from the OSHA website - please visit: http://www.osha.gov/dte/outreach/

 

Rhode Island OSHA Safety Training - State Requirements

Rhode Island is not a “state-plan” state; that is, it does not have a federally approved occupational safety and health program. Consequently, occupational safety and health in the private sector workplace is governed by the federal Occupational Safety and Health (OSH) Act. There is no state law that governs workplace safety in the public sector (state and local agencies, school systems). Source: OSHA Directorate of State Plans

Rhode Island Requires OSHA Construction Training
According to Rhode Island General State laws, Chapter 37-23-1 requires OSHA 10hr safety awareness training for construction workers and supervisors:

  • All workers who perform work on municipal and state construction projects with a total project cost of one $100,000 of more to OSHA10-hour certification. Workers are also to carry the card on their person at all times while work is actually being performed.
  • Any employee required to complete the OSHA 10-hour construction safety program who has not completed the program will be subject to removal from the worksite, if the employee does not provide documentation of having completed such program by the 15th day after the date the employee is found to be in noncompliance.
  • The state may also assess a civil penalty of up to $2,500; in addition, such an employer shall be assessed a civil penalty of $100 per employee for each day of noncompliance. 

Rhode Island Required Training - 10hr OSHA Outreach - Construction
Reference: Rhode Island General Laws - Title 37. Public Property and Works - §37-23-1 Safety awareness program required (PDF)

For other jobs in Rhode Island, some companies require their employees to take OSHA training in order to be qualified to perform certain duties. However, whatever industry you work for in Rhode Island - taking an OSHA Training Course is a low cost investment that rewards you with essential job safety practices that could one day possibly save your life. Most workplace accidents and injuries are preventable, so take a proactive step towards your workplace safety.

Rhode Island Occupational & Labor Safety State Agency

The Rhode Island Department of Health's mission is to prevent disease and protect and promote the health and safety of the people of Rhode Island.

  • The Rhode Island Department of Health - OSHA Consultation Program arranges for experienced occupational hazard consultants to visit businesses with less than 250 employees to help them find occupational hazards and recommend approaches to address these hazards, provides speakers and training for safety and health meetings, seminars, or conferences, and recognizes businesses that are exceptional in their establishment of and maintenance of safe worksites through the Safety and Health Achievement Recognition Program (SHARP).

The Rhode Island Department of Labor and Training offers employment services, educational services and economic opportunity to both individuals and employers.

  • The Rhode Island Department of Labor and Training - Labor Standards Unit administers and enforces labor laws in the state.
  • The Rhode Island Department of Labor and Training - Occupational Safety Unit protects the public and private sector by enforcing health and safety standards for all state agencies, public buildings, and city and town educational facilities and by educating the public regarding these standards.

Rhode Island SOII
U.S. Department of Labor - Bureau of Labor Statistics
JFK Building, E-310
Boston, MA  02203
Phone: 617-565-2302

Rhode Island CFOI
Rhode Island Department of Health
3 Capital Hill, Room 101
Providence, RI  02908-5097
Phone: 401-222-2804
Web: http://www.health.ri.gov

State Reporting:

  • SOII - Workplace Nonfatal Injuries and Illnesses: State data for Rhode Island for years after 2007 is not available.
  • CFOI - Workplace Fatalities

OSHA Federal Labor Data

The U.S. Bureau of Labor Statistics (BLS) - State Occupational Injuries, Illnesses, and Fatalities (IIF) Program - provides annual information on the rate and number of work-related injuries, illnesses, and fatal injuries, and how these statistics vary by incident, industry, geography, occupation, and other characteristics. This data is collected through two BLS programs:

  • SOII - BLS Survey of Occupational Injuries and Illnesses
    The SOII provides estimates for nonfatal cases of work-related injuries and illnesses from 46 States and Territories that are recorded by employers under the Occupational safety and Health Administration's (OSHA's) recordkeeping guidelines.
  • CFOI - BLS Census of Fatal Occupational Injuries
    The CFOI publishes data on fatal cases of work-related injuries for all States, Territories, and New York City.

For more information, check out the BLS State Occupational Injuries, Illnesses, and Fatalities - Labor Programs and State data.

Rhode Island OSHA Top Fatal and Nonfatal Injuries and Illnesses

According to latest data, the leading cause of workplace fatalities in Rhode Island was in the construction and extraction occupations (Source). Among these, construction laborers, first-line supervisors, and managers of construction trades and extraction workers, roofers, carpenters, and electricians experienced the most fatalities.

For more information, OSHA has a webpage that provides information about the top four hazards of the construction industry that lead to fatalities: falls, struck-by and caught-in/between, electrocal incidents, and trenching and escavation; solutions that can reduce the risk or frequency of these incidents; articles and resources; and references to existing regulations.

As with most states, the leading causes of private sector worker deaths (excluding highway collisions) in the construction industry were falls, followed by electrocution, struck by object, and caught-in/between.
Source: OSHA Common Statistics Summaries

Falls deaths are preventable by a safety training class that covers 29 CFR 1926.500 - Subpart M – Fall Protection and deals with both the human and equipment-related issues in protecting workers from fall hazards.
Sources: OSHA – Fall Protection in Construction (PDF); OSHA's Fall Prevention Campaign

Rhode Island Nonfatal Occupational Injuries and Illnesses Data by Industry (SOII)
(Please contact the State for additional data.)
Note: State data for Rhode Island for years after 2007 is not available.

Rhode Island Fatal Occupational Injuries (CFOI) Data
(Please contact the State for additional data.)
- 2015 Fatal injury counts (HTML) rates (HTML)
- 2014 Fatal injury counts (HTML) rates (HTML)
- 2013 Fatal injury counts (HTML) rates (PDF)
- 2012 Fatal injury counts (HTML) rates (PDF)

Rhode Island OSHA Online Training

Rhode Island OSHA training can help you comply with OSHA training standards so you can protect yourself or your employees from workplace injuries and death. Is your organization compliant with OSHA training standards? We can help you comply – and go beyond compliance – for the safety and well-being of your employees.

Disclaimer: The information presented on this website has been compiled from Federal and State sources and documents believed to be reliable and represent the best professional judgment of OSHA Training. The accuracy of the information presented, however, is not guaranteed, nor is any responsibility assumed or implied, OSHA Training, and/or any other individual or entity, as applicable for any damage or loss resulting from inaccuracies or omissions. Contact state program staff directly to verify information.

Rhode Island OSHA Outreach Trainer Contact

Our OSHA Outreach training courses are accepted by OSHA and powered by 360training.com.
Outreach Trainer – Curtis Chambers - OSHAtrainer@360training.com

osha training